Lissmac CDM 25 W, Руководство по эксплуатации, Страница: 15 / 30

15/30
3.4. Tool selection
Danger! The use of non-tested or unauthorised tools is prohibited. Damaged tools must not be used!
Depending on the application purpose and area, tools are different. To have the best results, the
parameters must match. For this the maximum core drill diameter must be observed in reference
to the peripheral speed.
Gear level I Gear level II Gear level III
CDM 25 W max. ø 250 mm max. ø 120 mm max. ø 80 mm
CDM 33 W max. ø 350 mm max. ø 160 mm max. ø 100 mm
Fixtures for tools
The core drill motor has a drill crown collet of 1 ¼" UNC.
Maximum tool length
The maximum tool length is dependent on the core drill stand.
Storage of tools
Tools must be protected against humidity during storage. The attached segments must be
protected from damage.
Note In the LISSMAC sales booklet, the prices for the tools are determined. This sales booklet can be
obtained from the manufacturer at any time.