DIREZIONE
Via Veneto, 8
– I-24041 Brembate (BG)
Tel. +39 035 4826195
– Fax +39 035 2283818
www.liski.it
4
EXAMPLE DESCRIPTION
PROTECTION SYSTEM TYPE “BC-130”
Rows made with :
- nr. 2 or more groups of 15m x height 1,30 m of braided net, plait ø 3,5mm and mesh
50x50mm
- nr. 18 polycarbonate poles ø 35 x h 165cm, with 2 net hooks each at the top and low
position;
(nr. 9 poles for each group)
Note: the quantity of poles per group may change to fit protection requirements. For example can
be assembled rows with 16 poles into a 15mt net (distance between poles 1 m)
5)
AFTER USE
The inspection of LISKI BC-130 NET systems must be carried out before and after each use by
personnel who have received and reviewed all of the information contained in the present
document.
Maintain an updated logbook of the frequency of use of this product.
After use remove snow/ice from nets and support poles, align net to be re-wound in a straight line,
rotate the first support pole along the net to create a bundle and place the nets in the appropriate
transport/storage cradles.
Nets should be stored clean, dry and out of direct sunlight, and away from extreme heat and in a
well-ventilated warehouse. Nets should be kept off the floor and stored upright, on racks, to provide
ventilation underneath. It is better to store the nets vertically to allow drainage and prevent contact
of the fiber with the ground. Never store directly on a concrete, metal or dirt floor, and under no
circumstances should nets and/or acid and/or alkalis by kept in the same building. Product life will be
shortened by chemical and corrosive products or excessive temperatures.
