NOTE:
Door Sensors are provided to match the door width provided.
INSTALLATION INSTRUCTIONS:
FULL SURFACE CONTINUOUS HINGE
See Separate sheet provided for installation instructions.
POWER SUPPLY / CONTROLLER
•
Install the Power Supply / Controller / Strobe in corridor outside room. 110vAC
connection required
•
Power up the controller. All LED
s should turn green.
KEY SWITCH
•
Add mortise cylinder (straight Yale cam) below Power Supply/ Controller.
•
Mount gang box at door and run armored cable to power supply/controller.
•
Fasten armored cable to wall with one armored cable strap approx every 12". (You
will have extra straps.)
•
Connect wiring per wiring diagram. Key switch is
NC
system can not work without
it.
DOOR SENSOR
See Separate sheet provided for installation instructions. Note that additional sensors/
doors can be added in parallel (see wiring diagram)
A
B
D
A
B
C
D
C
INS LISA 1DR.vsd Created: 10-6-201 7 Revise d:10-6-201 7
Pag e 2
LISA 1DR (Standalone Door Alarm)
Install Instructions
