Liquivision kaon, Руководство пользователя

Страница: 53 / 107

Dive Computer
User Manual
Liquivision Products, Inc -
53
- Revision 1.9 Software 1.17
You should always dive within the No Decompression Limit (NDL), unless you have specific training
in decompression diving. You should always begin your ascent FIRST based on having sufficient gas
remaining and, if you do have sufficient gas remaining, THEN based on staying within the NDL.
Safety Stop
When you ascend within the NDL limit, you will be asked to complete a safety stop for 3 minutes at
5m / 15ft. If, at any time during these 3 minutes, you drop below 6.5m / 21ft, the safety stop counter
will turn off and reset. It will begin again once you return to the safety stop depth of 5m / 15ft.
If you are diving with enriched air/nitrox, your KAON calculates your CNS
(Central Nervous System) and OTU (Oxygen Toxicity Unit) loading. Your
current CNS/OTU levels are easy to access through the
Oxygen Loading (for enriched air/nitrox dives)
Your Saturation
menu item and the screen looks like this.
For a full explanation of CNS/OTU values, please refer to your nitrox
training manual.
Entering the water
We recommend that you turn your KAON on yourself before you enter the water to check the
remaining battery power and to make sure that all is functioning properly. You can turn it on by
tapping the unit in the Down direction 3/5 times.
Turning Your KAON On
Otherwise, it will turn on automatically few seconds after you take it deeper than 1.6 meters / 5.25 feet.
When you start to descend and go below 1.6 meters / 5.25 feet, your KAON will turn into dive mode.
Beginning Your Dive
Dive Display
There are two underwater display layouts – Standard and Graphic. Both look the same while diving
within the No Decompression Limit, but they look different if you enter into decompression.
You can edit the colors of all the items on your screen, although you should be careful to consider how
the changes you make will impact battery consumption. Refer to the
Colors menu item for more
information on setting colors, and to the Important Information About KAON Batteries for impact of
color on power consumption.
The large yellow number in the upper-right-hand corner of your display (here, circled in red) is the
Dive Time. Dive time is measured in minutes and seconds, starting from the moment your KAON
reaches 1.6 meters / 5.25 feet.
Dive Time