User Manual for LIQUIPRINT 3D Printers
Version:
WB20141117
11
Tips: If the filament refuses to go into the feeder, you may need to preheat the extruder first and then go to the
LCD pane: “Prepare”
→
”Move Axis”
→
”Move 1mm”
→
”Move Extruder” to make the value as 100 or above.
After that, you may push the filament into the feeder as shown below:
D.2.4 Change Filament During Printing
If you find that the material is running out during printing or you want to change another color, you may do as
shown below. (Note: the yellow material is the current one while the green one is the new material).
On the main menu
“prepare”
“preheat
PLA”or“Preheat ABS” to heat the
extruder
Push the filament through with
strength until the filament passes the
gear to the tube
After heating, insert the filament to
the extruder and push it down a
little
Insert the tube to the extruder
Material comes out of the nozzle
Put back the blue buckle
1111
2222
3333
4444
5555
6666