Liquifi ELEMENTS Series, Руководство пользователя, Страница: 21 / 23

The RS-232 control port enables the TV to be controlled from a home automation control system.
Your TV is RS232 controllable via the p-pin “ D ” plug on the back of it. Operating codes for this
are as follows. We have also included the Infra-Red codes to assist in home networking installation.
www.liquifi.com.au -
22
-
RS232 and Infra-Red Codes
Computer Control of the System
Your TV can be controlled from a computer, using the RS-232C terminal.
The input signal can be selected, the volume can be adjusted and various other adjustments and settings can be
made, enabling au tomatic external con trol of your television by your home-networking system or similar.
Connect an RS-232C cable cross-type (commercially available) to the supplied 9-pin “ D ” RS-232C for the connections.
This operation system should only be used by an experienced home-networking/computer installer.
Set the RS-232C communications settings on the computer to match the display ’ s communications settings.
The display's communications settings are as follows:
9-Pin “ D ” Connections are as follows: Command Code Sequence