12
Operating Instructions - EC145 LIQUI MOLY RTF 2.4 GHz No. LM001001
Fig. A
Fig. B Fig. C
Flying
1. Switch the helicopter and transmitter on (see paragraph "Ope-
rating the model" on page 11).
2. Place the helicopter on a horizontal surface in front of you,
with the tail pointing towards you.
3. Slowly and steadily move the throttle stick forward until the he-
licopter lifts off and hovers in front of you at a height of about
one metre. If it swings to left or right, rotate the trim wheel (Fig.
A) to correct the movement until the helicopter hovers smooth-
ly in front of you.
If you move the pitch-axis stick forward, the helicopter flies
forward. Pull it back towards you, and the helicopter flies back-
wards.
Moving the yaw control to the left causes the helicopter to turn
to the left. Move the yaw control to the right, and the helicopter
turns to the right.
4. You can switch the LED in the helicopter on and off in flight by
pressing the Light button (Fig. B).
5. If you press the Demo button (Fig. C) while the model is ho-
vering, the helicopter automatically flies a few metres forward,
then flies back again. After this it stops before turning to left
and right.
The monitor LED on the helicopter flashes during this "demo
flight". When the "demo flight" is over, the monitor LED lights
up constantly again.
You can terminate the "demo flight" at any time by pressing the
Demo button (Fig. C) again.
You can still control the helicopter's height with the throttle
stick.
Ensure that there is adequate space when carrying out a
"demo flight"!
