17
432-LIPPERT (432-547-7378)
Rev: 08.29.22
Quick Drop Stabilizer
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004455
Proper Stabilizer Position
Using Visual Gauge
It is important that the Quick Drop leg be positioned so
that the trailer weight is evenly distributed by the stabilizer.
The visual gauge
(Fig. 30A)
is referenced in the proceeding
instructions to determine that the Quick Drop leg has
sufficient angle to adequately stabilize the trailer.
As the Quick Drop Stabilizer is extending, monitor the
visual gauge as the outer arm drops and the inner arm
moves across the assembly body toward the hex coupler.
The arms will need to be open enough
(Fig. 30B)
for the
inner arm and Quick Drop leg to move past the visual
gauge.
NOTE:
Figure 30B refers to the space that is open and
between the arms as the Quick Drop Stabilizer is in use.
FAILURE TO ACT IN ACCORDANCE WITH THE
FOLLOWING MAY RESULT IN DEATH, SERIOUS
PERSONAL INJURY OR SEVERE PRODUCT OR
PROPERTY DAMAGE. ALWAYS MAKE SURE THE
STABILIZER AREA IS CLEAR OF PETS, PEOPLE
AND OBJECTS BEFORE AND DURING OPERATION
OF THE SYSTEM. ALWAYS KEEP AWAY FROM THE
STABILIZER LEGS WHEN IN OPERATION.
Fig.30
A
B
