Rev: 09.23.2016
Page 4
Standalone Smart Jack OEM Install Manual
Fig. 4
A
Fig. 3
B
A
A
2.
Align the 3 holes in the Smart Jack mounting plate (Fig. 3A) with the 3 holes in the coupler (Fig. 3B).
3.
Secure the Smart Jack to the coupler with three 3/8" - 16 x 1" serrated flange grade 5 zinc coated bolts
(Fig. 4A).
4.
Connect the red power wire from the Smart Jack housing to a grounded 12V power supply on the
trailer.
NOTE:
The Smart Jack
MUST
be wired with a 30 amp in-line fused circuit.
5.
Reattach the foot pad to the jack leg by sliding the foot pad back over the bottom of the jack leg and
securing it with the previously-removed clevis pin and hairpin cotter pin.
