background image

tv

2

lci1.com      

 

574-537-8900    

 

Rev: 02.10.20

CCD-0002548

SolidStep

®

 3.0 

Adjustable Latch

Installation and Owner’s Manual

(For Aftermarket Applications)

Introduction

The SolidStep

®

 3.0 is a trailer entry step assembly that can  

be mounted to the side of any trailer, providing an ease  

of entry, regardless of level ground. 
Additional information about this product can be obtained 

fro

lci1.com/support

 or by using the myLCI app. 

Replacement kits can be ordered from 

https://store.lci1.

com/

 or by using the myLCI app.

The myLCI app is available for free on iTunes

®

 for iPhone

®

  

and iPad

®

 and also on Google Play

 for Android

 users.

iTunes

®

, iPhone

®

, and iPad

®

 are registered trademarks  

of Apple Inc.
Google Play

 and Android

 are trademarks of Google Inc.

XX

"

XX

"

edge of 

doorframe

Fig.1 

Purchase Verification

XX” - To verify the proper size of the SolidStep required, 

measure frame to frame 

(Fig.1)

 of the trailer door. This 

number should correspond to the SolidStep

®

 purchased. 

For example, a 30” door will measure approximately 29 

1/2

” 

frame to frame.

FAILURE TO FOLLOW THE INSTRUCTIONS 

PROVIDED IN THIS MANUAL MAY RESULT IN DEATH, 

SERIOUS INJURY, TRAILER DAMAGE OR VOIDING 

OF THE PRODUCT WARRANTY.

ALWAYS WEAR EYE PROTECTION WHEN 

PERFORMING SERVICE OR MAINTENANCE TO 

THE TRAILER. OTHER SAFETY EQUIPMENT TO 

CONSIDER WOULD BE HEARING PROTECTION, 

GLOVES AND POSSIBLY A FULL FACE SHIELD, 

DEPENDING ON THE NATURE OF THE SERVICE.

Safety Information

Read and understand all instructions before installing  

or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e.,  

the degree of difficulty, operation and ability of the 

individual performing the instructions. This manual 

cannot begin to plot out instructions for every possibility, 

but provides the general instructions, as necessary, for 

effectively interfacing with the device, product or system. 

Failure to correctly follow the provided instructions may 

result in death, serious personal injury, severe product  

and/or property damage, including voiding of the LCI 

limited warranty.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

A SAFETY RISK IS INVOLVED AND MAY CAUSE 

DEATH, SERIOUS PERSONAL INJURY AND/OR 

SEVERE PRODUCT OR PROPERTY DAMAGE IF 

NOT SAFELY ADHERED TO AND WITHIN THE 

PARAMETERS SET FORTH IN THIS MANUAL. 

Содержание SolidStep 3.0









Отзывы: