Lippert Components Solera 674282, Инструкция по установке и эксплуатации, Страница: 3 / 8

3
lci1.com 574-537-8900 Rev: 02.06.20
Solera
®
Awning LED
Light Strip Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002359
Preparation
Custom Sizing of the LED Light Strip
There are two available sizes for the awning fabric LED light
strip kit. If the awning width, measuring the awning fabric
edge-to-edge, measures 10’ - 15’ the 15’ LED light strip
kit should be used. If the awning fabric measures 16’ - 21’
the 21’ awning LED light kit should be used. To achieve a
custom size, the LED light strip can be cut along the black
line at the nearest copper cut tab
(Fig.1A)
.
NOTE: If cutting the LED light strip is required, it is very
important to cut only on the given cut line between the
copper cut tabs (Fig.1A) . Cutting through or before the
copper cut tabs will result in no electrical conductivity to
the following section.
1.
At the closest applicable length needed, usually the
width of the awning fabric, measure from the wired side out.
2. Cut the excess light strip from the opposite side of
the wiring on the LED light strip. Use a pair of sharp
scissors to cut the LED light strip directly down the
given cut line (Fig.1A) .
3. Seal the LED light strip cut end with a dab of silicone
along the edge and let dry.
Fig.1
A
Resources Required
• Cordless or electric drill
or screw gun
• Appropriate drive bits
• Cordless or electric saw
•
Appropriate cutting blades
• Sharp scissors,
if applicable
• Fuse appropriate for wiring
• Silicone sealant
• Marker
15’ Solera® Awning Aftermarket LED Light Strip 15’ Solera® Awning Aftermarket LED Light Strip
Kit PN 674282 Kit PN 674282
Letter Letter PN PN Description Description Qty Qty
A 387593 15’ LED Light Strip 1
B 431032 Light Switch 1
C 431033 Light Switch Plate 1
D 227619 #8 x 1” Square Pan Head Screw 2
E 388271 #10 - 16 x 3/8” Pan Head Screw 1
Parts List
21’ Solera® Awning Aftermarket LED Light Strip 21’ Solera® Awning Aftermarket LED Light Strip
Kit PN 674283 Kit PN 674283
Letter Letter PN PN Description Description Qty Qty
A 387594 21’ LED Light Strip 1
B 431032 Light Switch 1
C 431033 Light Switch Plate 1
D 227619 #8 x 1” Square Pan Head Screw 2
E 388271 #10 - 16 x 3/8” Pan Head Screw 1
B
C
D
E
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
A