Lippert Components Schwintek TV Lift, Руководство по установке OEM

Страница: 4 / 8

Rev: 01.22.20
Page 4
CCD-0001576
Fig. 3
Fig. 4
B. Insert rack until the gear in the bearing block comes into contact with the serpentine groove of
the rack (Fig. 3).
C.
Press the switch's RETRACT button (Fig. 4) until the rack is fully inserted into the bearing block.
5.
Mount the cabinet top angle transition plate onto the rack (Fig. 5).
Fig. 5
A B C
Fig. 6
Initial Programming
NOTE:
The control's green LED (Fig. 6B) will flash and its red LED (Fig. 6C) will light up solid.
If the lights do not do as stated in NOTE above then enter programming mode. Press and hold the white
CONFIGURATION button (Fig. 6A), located on the control, for five seconds.