Lippert Components ONECONTROL WIFI ON-THE-GO Скачать руководство пользователя страница 1

Страница: 1 / 3

Rev: 05.29.19

Page 1

CCD-0002663

ONECONTROL

WIFI ON-THE-GO

REPROGRAMMING AFTER RESET

TI-318

ELECTRONICS

Reconfiguration Procedure for WiFi On-the-Go™

NOte:

For the best security, use a personal computer and Ethernet cable connected to the cellular

gateway, using one of the LAN ports. Mobile devices will work as well.

NOte:

There may be a sticker covering the RESET button (Fig. 1A). Remove the sticker and proceed with step 1.

Turn on the cellular gateway.

On your Android, iOS smart device or personal computer, look in the settings network for the Service

Set Identifier (SSID) of the cellular gateway.

Press and hold the RESET button (Fig. 1A) on the back of the cellular gateway for 10 seconds until all

indicator lights (Fig. 1B) light up or flash.

Fig. 1

The SSID may revert back to OpenWrt_7620_2.4G_5544 at the WiFi settings on your device.

Once the SSID is available again in the settings network, connect to the cellular gateway and go

to a web browser. Type 192.168.1.1 (Fig. 2A) in the web browser's address field to reach the

administration page.

NOte:

The last 4 characters of “OpenWrt_7620_2.4G_5544” will be different for each router.

Fig. 2

Содержание ONECONTROL WIFI ON-THE-GO

Страница 1: ...S smart device or personal computer look in the settings network for the Service Set Identifier SSID of the cellular gateway 3 Press and hold the RESET button Fig 1A on the back of the cellular gatewa...

Страница 2: ...ICS 5 Locate the Authorization Required on the web page The username is root and type in the password admin Fig 3A Fig 3 A 6 At the top menu bar of the web page select Network Fig 4A select Interfaces...

Страница 3: ...or by downloading the MyLCI app TI 318 ELECTRONICS ONECONTROL WIFI ON THE GO REPROGRAMMING AFTER RESET 7 Under Common Configuration in the General Setup make sure the fields below match the fields in...