Lippert Components ONECONTROL WIFI ON-THE-GO Скачать руководство пользователя страница 1

Rev: 05.29.19

Page 1

CCD-0002663

ONECONTROL

®

 WIFI ON-THE-GO 

REPROGRAMMING AFTER RESET

TI-318

ELECTRONICS

Reconfiguration Procedure for WiFi On-the-Go™

NOte: 

For the best security, use a personal computer and Ethernet cable connected to the cellular 

gateway, using one of the LAN ports. Mobile devices will work as well.

NOte: 

There may be a sticker covering the RESET button (Fig. 1A). Remove the sticker and proceed with step 1.

1. 

Turn on the cellular gateway.

2. 

On your Android, iOS smart device or personal computer, look in the settings network for the Service 

Set Identifier (SSID) of the cellular gateway.

3. 

Press and hold the RESET button (Fig. 1A) on the back of the cellular gateway for 10 seconds until all 

indicator lights (Fig. 1B) light up or flash.

Fig. 1 

A

B

4. 

The SSID may revert back to OpenWrt_7620_2.4G_5544 at the WiFi settings on your device.  

Once the SSID is available again in the settings network, connect to the cellular gateway and go  

to a web browser. Type 192.168.1.1 (Fig. 2A) in the web browser's address field to reach the 

administration page.

NOte: 

The last 4 characters of “OpenWrt_7620_2.4G_5544” will be different for each router.

Fig. 2 

A

Отзывы: