Lippert Components Hotspot OEM, Руководство по установке

Страница: 2 / 8

Rev: 12.13.2018
Page 2
CD-0002211
TABLE OF CONTENTS
Introduction 2
Safety Information 2
Resources Required 2
Installation 3
Power Supply
5
Troubleshooting 6
Notes 7
Introduction
Hotspot™ was designed and engineered for the mobile lifestyle. The weatherproof, externally-mounted
antenna array increases your signal range far beyond a simple “off-the-shelf” mobile hotspot that can
lose strength by just moving your device around the campsite. Hotspot™ utilizes Direct Link Technology
specifically designed for the RV lifestyle. Direct Link Technology provides the fastest 4G LTE connectivity
available, up to 150Mbps, so you’re connected wherever the road may take you.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Safety Information
Always wear eye protection when performing installation. Other safety equipment to consider would be
hearing protection, gloves and possibly a full face shield, depending on the nature of the installation.
Resources Required
• Cordless or electric drill or screw gun
• Appropriate drive bits
• Sharp cutting tool
• Tape
• Tape measure
• Silicone sealant
• 16 AWG wire
• Wire nuts
• #8 x
3/4
" stainless steel pan head scews (12)