Rev: 11.29.18
Page 21
CCD-0001755
5K Jack - Top of Jack Motor Override:
Tools needed:
3/8
” drive ratchet and extension (no socket)
1.
Find the port on the top of the jack motor (Fig. 36A).
2.
Remove the rubber plug (Fig.37A).
3.
Insert the
3/8
” drive ratchet into the port (Fig. 38).
4.
Turn the override until the jack extends or retracts to desired position.
5K Jack - Bottom of Jack Motor Override:
Tools needed:
3/8
” drive ratchet and extension,
5/16
” socket
1.
Find the port on the bottom of the jack motor (Fig. 36B).
2.
Remove the rubber plug (Fig. 39A).
3.
Insert the
5/16
” socket into the port and onto the nut (Fig. 40A).
4.
Turn the override until the jack extends or retracts to desired position.
Fig. 37
A
Fig. 39
Fig. 38
Fig. 40
Fig. 36
A
B
Preventive Maintenance
1.
For optimum performance, the system requires full battery current and voltage. The battery must be
maintained at full capacity.
2.
Check the terminals and other connections at the battery, the controller, and the jacks for corrosion,
and loose or damaged connections.
3.
Remove dirt and road debris from jacks as needed.
4.
If jacks are down for extended periods, it is recommended to spray exposed leveling jack rods with a
silicone lubricant every three months for protection. If the coach is located in a salty environment, it is
recommended to spray the rods every 4 to 6 weeks.
A
A
