Lippert Components Cool LiteRunner-86DX, Техническое руководство, Страница: 7 / 53

TME-104-CLR-86DX-R0V2.doc Rev. 0.2
2(
44
)
1.2 Introduction
The Cool LiteRunner-86DX is a PC/104 board with DMP’s Vortex86DX single chip solution and has a very good
performance- power- ratio. The board comprises all peripherals needed for an embedded PC on a small 3.775" by
4.050" printed circuit board.
The Cool LiteRunner-86DX integrates a powerful yet efficient DMP Vortex86DX with a Xilinx FPGA and a GPS
module to form a complete PC, with all the standard peripherals already onboard. There is no graphic controller
and no audio controller integrated.
One fast 100/10BaseT Ethernet port, two RS232/RS422/RS485 serial ports, four USB 2.0 host ports and a USB
device port handle the communication with external devices. There are PS/2 connectors for keyboard and mouse
as well as an IDE ATA100 adapter allows connection of hard disk or CD drives. Applications that require non-
moving storage can use the MicroSD slot or the bootable flash.
System expansion can easily be realized over PC/104, Mini-PCI, SPI, LPC and I²C bus connectors.
The Cool LiteRunner-86DX is powered by a 5V-only supply and supports ACPI, advanced power management and
PCI power management. Two Cool LiteRunner-86DX boards can run together in a redundancy mode to make
security critical applications more secure.
The Cool LiteRunner-86DX runs DOS, Windows XP and Linux operating systems.
Features
CPU + Chipset (single chip solution)
•
DMP Vortex86DX (600 / 800 / 1000 MHz)
Extension slots
•
1 x 16-bit PC/104 with full DMA capability
•
1 x Mini PCI Slot
Main Memory
• soldered 256 or 512 MB DDR2 RAM 333 MHz
Interfaces
•
1 x Ethernet 10/100BaseT
• MicroSD slot
•
ATA-6 EIDE (Ultra DMA-100)
• PS/2 Keyboard/Mouse
•
4 x USB 2.0 ports
• 2 x RS232 / RS485 / RS422, software selectable
•
MISC signals:
external power button, I²C bus, speaker, external
reset button, hardware monitoring and general
purpose signals external battery connector
•
Redundancy over cable possible
• Power supply
Onboard devices
•
1x uBlox GPS module (Galileo ready)
• 1x Customer-I/O FPGA (Xilinx)
•
1x bootable 8MB flash
•
1x SMC / LEMT
Other configurations are possible at high volumes.