5
574-537-8900
Rev: 06.08.20
Hotspot
™
OEM Prepped
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002226
Fig.8
D
6.
Attach the two 2.4 GHz WiFi antennae
(Fig.7C)
to the
corresponding ports of the cellular gateway.
7.
For a power source, insert the power supply’s
(Fig.1E)
straight barrel connector
(Fig.8)
into the back of the cellular
gateway
(Fig.7D)
. Insert the opposite 90 degree barrel
connector
(Fig.9)
into the prepped plate
(Fig.6B)
.
Fig.9
Fig.7
A
B
C
8.
Verify power and connectivity with the Hotspot™ LEDs
on the cellular gateway. Lights will flash when connected.
9.
If desired, secure the 12V DC/DC power supply
(Fig.10)
to a permanent mounting surface by installing two
#8 x
3/4
” stainless steel pan head screws in between the
provided screw holders on the 12V DC/DC power supply
(Fig.10A)
and into a permanent mounting surface.
Fig.10
A
A
System Activation and
Configuration
A data package is required to activate the
OneControl Hotspot wireless Internet system. Go to
for data plan activation.
Have the claim code number, and a credit card available.
The claim code number is located on the product label
underneath the OneControl Hotspot gateway or on the
OneControl Hotspot owner’s card
(Fig.11A)
located inside
the packaging with the parts.
System Requirements
• Android, iOS smart device or computer
• Data Package
Activation
1.
Make sure the Onecontrol Hotspot gateway has power,
indicated by the flashing LEDs on top of the OneControl
Hotspot Gateway.
2.
On a computer or smart device, go to the website
A
Fig.11
