2
lci1.com
574-537-8900
Rev: 08.20.20
CCD-0003866
Flow Max
™
40V Portable Power Cleaner
Installation and Owner’s Manual
(For Aftermarket Applications)
Safety
Read and fully understand all instructions before installing
or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables
can change the circumstances of the instructions, i.e., the
degree of difficulty, operation and ability of the individual
performing the instructions. This manual cannot begin to
plot out instructions for every possibility, but provides the
general instructions, as necessary, for effectively interfacing
with the device, product or system. Failure to correctly
follow the provided instructions may result in death, serious
personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
THE “WARNING” SYMBOL ABOVE IS A SIGN THAT A
PROCEDURE HAS A SAFETY RISK INVOLVED AND
MAY CAUSE DEATH, SERIOUS PERSONAL INJURY OR
SEVERE PRODUCT AND/OR PROPERTY DAMAGE IF
NOT PERFORMED SAFELY WITHIN PARAMETERS SET
FORTH IN THIS MANUAL.
THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT A
PROCEDURE HAS A SAFETY RISK INVOLVED AND
MAY CAUSE PERSONAL INJURY OR PRODUCT AND/
OR PROPERTY DAMAGE IF NOT PERFORMED SAFELY
WITHIN PARAMETERS SET FORTH IN THIS MANUAL.
DO NOT OPERATE NEAR AN ELECTRICAL POWER
SOURCE SUCH AS AN ELECTRICAL OUTLET OR
WIRING. SPRAY CONTACTING ACTIVE ELECTRICAL
COMPONENTS CAN CAUSE PERSONAL INJURY FROM
AN ELECTRICAL SHOCK OR BURN.
DO NOT TOUCH THE ELECTRICAL PLUG WITH
WET HANDS. WET HANDS CONTACTING ACTIVE
ELECTRICAL COMPONENTS CAN CAUSE PERSONAL
INJURY FROM AN ELECTRICAL SHOCK OR BURN.
DO NOT DIRECT OPERATING POWER CLEANER
NOZZLE AT PEOPLE OR PETS. THE WATER PRESSURE
JET STREAM CAN CAUSE PERSONAL INJURY TO
UNPROTECTED FACIAL AND EXPOSED SKIN AND
SEVERE DAMAGE TO PETS.
DO NOT TOUCH THE NOZZLE OR WATER SPRAY
WHILE OPERATING THE POWER CLEANER OR
PERSONAL INJURY CAN OCCUR.
USE PERSONAL PROTECTIVE EQUIPMENT (PPE) SUCH
AS PROTECTIVE EYE-WEAR, GLOVES AND SHOES
WHEN OPERATING THE POWER CLEANER.
DO NOT USE ZERO DEGREE SETTING ON PAINTED
OBJECTS, SOFT WOOD SURFACES OR THIN PLASTIC
OR FABRIC SURFACES. WATER PRESSURE AT ZERO
SETTING ON SUCH SURFACE AND MATERIAL CAN
CAUSE PROPERTY DAMAGE. SELECT A LOWER
PRESSURE AND WIDER SPRAY SETTING TO CLEAN
SUCH SURFACES AND MATERIALS.
