Instructions
Flail mower ME 70/80/90/104/120/140..L
29 - 40
110725-E-03-EN BA ME-70-80-90-104-120-140-L / 05/11/2019
13.2.
Disassembly of Taper-lock bushing
Taper-lock bushings are built in both pulleys.
If the Taper-lock bushings have to be disassembled and re-
assembled, please note:
Prior to disassembly the Taper-lock bushings, both V-belts must
be removed.
To do this, first loosen the belt tensioner and then remove both
V-belts.
Each Taper-lock bushing has 3 threaded holes, 2 of which are in
each case for tightening the bushing, one of them used to loosen
the bushing.
Hole to lose the bushing
Hole to lose the bushing
Fig. 27
To release the adequate Taper-lock bushing remove both the
studs from the clamping holes.
Then lubricate slightly the hole for removing the Taper-lock bush-
ing. Afterwards screw in a threaded pin till the Taper-lock bush-
ing gets free and can be removed from blade shaft.
Содержание ME 104 L Series
Страница 35: ...Instructions Flail mower ME 70 80 90 104 120 140 L 35 40 110725 E 03 EN BA ME 70 80 90 104 120 140 L 05 11 2019...
Страница 36: ...Instructions Flail mower ME 70 80 90 104 120 140 L 36 40 110725 E 03 EN BA ME 70 80 90 104 120 140 L 05 11 2019...
Страница 37: ...Instructions Flail mower ME 70 80 90 104 120 140 L 37 40 110725 E 03 EN BA ME 70 80 90 104 120 140 L 05 11 2019...
Страница 40: ...40 40 Design mail bauer ib com...