Lipco ME 104 L Series, Перевод оригинальной инструкции

Страница: 15 / 40

Instructions Flail mower ME 70/80/90/104/120/140..L
15 - 40 110725-E-03-EN BA ME-70-80-90-104-120-140-L / 05/11/2019
•
Check at each start-up slow-down time of the blade brake.
To test the blade brake, run the machine with maximum engine
and PTO speed. After pressing the clutch lever or the PTO
switch, the blade shaft has to stop within 4 - 7 sec.
If the maximum slow-down time (7 sec.) is exceeded, the blade
brake must be checked.
It is not allowed to run the machine with exceeded slow-down
time.
Note:
It is not recommended to run the machine with slow-down time
lower than 4 sec. Running the machine with slow-down time
shorter than 4 sec. can create excessive overload on the belts
and leading thus to premature failure of the machine.
position blade brake:
Fig. 3