Page: 7
GROOVE
LIONSTRACS
OS 5.1
Main Volume Controls
The GROOVE uses digital audio volume controls, which means that the sliders only control the volume in a digital way, directly in software (as
opposed to analog, like other instruments). All audio are routed fully digitally, using 24bits, 116dB dynamic range and 10-20kHz bandwidth.
MAIN OUT: Stereo volume is controlled by the first GREY slider on the left-hand side, marked "MAIN MIX" and the relative outputs are the two
male XLR MAIN OUT L+R sockets on the back panel. All the default software is routed automatically by the Jack Connection OS to these two
XLR outs. Move the GREY slider and the Volume window will pop up. You can then see the virtual slider moving up and down following your
movements. The red light which appears under the virtual slider indicates that the hardware slider is locked on to the virtual controller.
CUE/MONITOR OUT: these two XLR connectors are used to prelisten/CUE or monitor your audio output using another power amplifier. The
CUE audio is controlled by the second slider from the left, which is BLACK and marked "CUE". It is possible to MUTE/UNMUTE the output with
the "CUE" key directly beneath it.
Phones OUT: the stereo PHONES OUT jack is controlled by the first GREY slider. Press and HOLD the "PHONES" key and move the GREY Main
slider to control the volume of the phones. You should see a green light move to the virtual channel you want to control, move the slider until it
locks on, as indicated by the light turning red, then it will be possible to alter the volume of the headphones. When you play WAV/MP3 files, the
Player "CUE" key will route the audio to the phones. Open Jack control to connect more audio devices to the phones or to the Monitor/CUE
channel.
MIX OUT 2 OUT: these two monophonic jack outputs (left & right) can be used to freely connect to another output device of your choice.
press and HOLD the key MIX 2 and then move the second black CUE slider, it will control the volume of the MIX OUT 2.
LAMPS: Towards the top rear, you will find the two female XLR connectors on the extreme right and left-hand sides of the GROOVE. These
connectors are used to control and turn ON/OFF the external LAMPS. Press the "LAMPS" key and move the "CUE" slider to dimm the lamps
Main Volume
CUE/Monitor Volume
Hardware ghost slider
Phones Volume
Mix OUT 2 Volume
4 MUTE OUT keys
