Lionelo NOA PLUS, Руководство пользователя, Страница: 24 / 34

EN
Step 2:
Run the shoulder straps over the baby’s shoulders and
put the two metal connectors together, as shown in the picture 1.
Step 3:
Insert the joint connector into the buckle, as shown
in the picture 2. The “click” sound indicates that the connec -
tor has been properly locked in the buckle.
Step 4:
Pull the shoulder straps to make sure that they are
properly secured in the buckle, as shown in the picture 3.
5.2.3 Tightening the straps
Pull the shoulder straps up so as to stretch them out. Then
pull the adjustment strap to tighten the harness.
The shoulder straps should be neither too tight nor too loose so as
not to cause discomfort to the child.
5.3 Securing the baby seat
In order to properly mount the baby seat in a car, please refer
to the corresponding information in the vehicle’s manual.
Do not mount the baby seat in a vehicle’s front car seat with
active airbags.
This baby seat can only be secured in a car with a 3-point
seat belt.
The baby seat must be installed in a rear-facing position.