Lionelo Nebi Pro, Руководство пользователя

Страница: 8 / 24

EN
7.
Gently touch the switch to start nebulization.
Nebulization
NOTE:
Use the type and amount of drug in accordance with doctor’s prescription.
1.
Switch the nebulizer on by touching the switch with a finger. Green LED will go on.
NOTE:
If red LED flashes after you have switched it on, it means that the drug chamber is empty,
chamber has been assembled improperly or batteries are flat.
2.
Check if the aerosol goes out of the membrane after starting – if this is the case, the device oper-
ates properly.
3.
Gently tilt the nebulizer, as presented below. In this position a vibrating filter is immersed in the
drug and nebulization can be initiated. After you have taken this action, you can use the nebu-
lizer at any angle. If nebulization stops and the drug is in the chamber, tilt the nebulizer again to
immerse the filter in the drug.
4.
Put the mouthpiece in your mouth or the mask on the lips and nose.