3
Assembling the Truss Bridge
Follow these steps to assemble the Truss Bridge.
If you choose to permanently assemble the Truss Bridge, you may apply any cement
intended for use with plastic kits (not included).
1. As illustrated in Figure 1, fit the steel base into the slot on the inside of the side structures.
Secure the base to the side structures using the flat-head screws, two on each side.
2. Snap the end panels onto the pins on the side structures. Refer to Figure 2.
Note!
Use flat-head
screws to attach
the base.
Side structure
Base
Figure 1. Securing the side structures to the base
Figure 2. End panel installation
Pin
End panel
Side structures
