Running your train
If you activate multiple “stand by” dialogues during the first 35 seconds, the length
of time before the “clear for departure” dialogue becomes 35 seconds, plus the
length of the dialogue.
Press the WHISTLE/HORN button
Dialogue
From power-up to about 35 seconds
“Stand by” dialogue
After 35 seconds
“Clear for departure” dialogue
After 60 seconds
Random, automatic crew dialogue
Operating the TrainSounds sound system
W
hen you power up the locomotive on the track, you will hear the sounds of the idling steam
locomotive. The chuffing sounds will increase proportionally with the locomotive's speed.
WHISTLE/HORN SOUNDS
Press the
WHISTLE/HORN
button on your transformer to sound the whistle/horn. The sound
will play for as long as you hold the button.
BELL SOUNDS
Press the
BELL
button on your transformer to activate the bell sound. Press
BELL
again to dis-
continue the sound.
BRAKE SQUEAL SOUNDS
To activate the sound of squealing brakes, operate your locomotive at the highest sound intensity level
for at least ten seconds, and then slow to a lower level. The brake sounds will discontinue automati-
cally after a few moments.
If you are unable to activate the brake sounds, your locomotive’s speed may be too
low. Increase the speed of your locomotive, operate for at least ten seconds, and then
reduce the throttle by half.
CREW DIALOGUE
When the locomotive is not in motion, you may activate random crew dialogue using the WHISTLE/
HORN button on your controller.
The locomotive must be powered up on the track and not in motion for the dialogue
to play. Do not turn off track power.
Note!
Note!
Note!
11
