ON
OFF
ON
OFF
SMOKE
DIR
Running your train
Reverse unit procedure
W
hen the Electronic E-unit Direction Lock switch is in the RUN position, your locomotive
sequences through a repeating pattern of operations: forward, neutral, reverse, neutral,
and so on.
To lock your locomotive into forward direction only operation, you can deactivate the
Electronic E-unit’s sequencing function. Follow the steps below and refer to Figure 2 for the
location of the Electronic E-unit Direction Lock switch.
Always turn off track power before removing the locomotive from the track.
1. Turn off track power, wait three seconds, and remove the locomotive from the track.
Now slide the Electronic E-unit Direction Lock switch to the LOCK position. Your
locomotive is now locked into forward direction only operation.
2. Place your locomotive back on the track. Power up the track and press the direction
button on your transformer to confirm that the locomotive is now locked into forward
direction only operation.
To restore the forward-neutral-reverse sequence, turn off power and remove your locomotive
from the track. Slide the Electronic E-unit Direction Lock switch back to the RUN position.
Place the locomotive back on the track and restore track power.
8
Figure 2. Switch and volume control locations
Front of the locomotive
Rear of the locomotive
Reverse Unit Switch
Smoke Switch
Volume control knob (located
on the frame). Rotate the truck
to access this control.