Tender rear coupler
releases.
Coupler release
sounds.
9
Press AUX2 to turn
your ‘A’ Class’ head-
light on and off.
Press WSTL/HRN to
activate the ‘A’ Class’
whistle, release to dis-
continue.
Multi-
Whistle steam
whistle sound.
Press DIR—the loco-
motive decelerates to a
complete stop; turn the
throttle up, and the loco-
motive moves in the
opposite direction. There
is no neutral.
Steam
air-release sound.
Press BELL once to
activate the bell, again
to discontinue.
Traditional bell
sound.
PressHALT to shut down all
PowerMaster electrical out-
put on your railroad. Stops
all Command-equipped
Lionels in
operation.
Turn the THROTTLE to
the right to accelerate,
left to decelerate.
Speed-dependent
variable steam
chuffing.
DynaChuff dynamic
chuffing effect.
CAB-1 commands for your ‘A’ Class
Press and hold BOOST for
extra power. Release
BOOST and return to the
locomotive’s previous
speed.
Labored chuff.
Press and hold BRAKE to slow down or stop. Release BRAKE and
return to the previous speed.
Squealing brake sounds.
‘A’ Class RailSounds
effects in bold italic
Running your ‘A’ Class in the TrainMaster
Command environment
Y
our Command-equipped ‘A’
Class comes factory-pro-
grammed with an ID# of “1.” To
get your ‘A’ Class into action, set
PowerMasters to CMD or set all
power supplies on full. Press ENG
and “1” on CAB-1. Turn the
throttle or press any command
button; RailSounds starts up.
Your ‘A’ Class is ready for
Command operations.
Address Locomotive #1
PowerMasters set to CMD or traditional
power supplies ON FULL
Press ENG
Press 1 (the ID#)
Throttle up/press any command button
Example
