background image

Congratulations! 

2

C

ongratulations on your purchase of the
ready-to-run Southern Diesel Freight Train

Set! This set features everything you need to get
started—a mighty CW-80 Transformer, a huge
loop of easy-to-assemble FasTrack track, a
string of detailed cars, and a powerful Lionel
locomotive. 

Have fun growing with this complete train

set! Start with the set components, then fol-
low your imagination into your own minia-

ture world. Expand your railroad empire
with additional FasTrack track sections,
enhance your layout with accessories,
lengthen your consist with extra cars, or
operate a new locomotive at the head end of
your train! Explore the possibilities at your
authorized Lionel dealer.

Use this Owner’s Manual to learn how to

set up, operate, and maintain your train set
for years of reliable operation. 

The transformer included with this set should be periodically
examined for conditions that may result in the risk of fire,
electric shock, or injury to persons (such as damage to the
output cord, blades, housing, or other parts). In the event that
such conditions exist, the transformer should not be used until
properly repaired.

Parents!

Southern Diesel Freight Train Set Features

Southern Diesel Freight Train Set Inventory

• GP-38 diesel locomotive
• Boxcar
• Hopper
• Searchlight Car
• Caboose
• CW-80 Transformer
• Three straight FasTrack track 

sections

• Eight curved FasTrack track 

sections

• One straight FasTrack terminal

track section

• Owner’s Manual
• Service Center list
• Instruction video

Bright
headlights

Operating
couplers

Opening
boxcar
doors

Operating
searchlight

Lighted
caboose
interior

Diesel
horn

Forward-Neutral-Reverse
operation

Содержание New York Central Limited





















Отзывы: