background image

Congratulations! 

2

C

ongratulations on your purchase of the ready-to-run New York Central Flyer Train Set with the
RailSounds sound system! This set features everything you need to get started—a mighty CW-

80 Transformer, a huge loop of FasTrack track, a string of detailed cars, and a powerful Lionel loco-
motive. Plus, you get the authentic locomotive sounds of the RailSounds sound system.

Have fun growing with this complete train set! Start with the set components, then follow

your imagination into your own miniature world. Expand your railroad empire with addition-
al FasTrack track sections, enhance your layout with accessories, lengthen your consist with
extra cars, or operate a new locomotive at the head end of your train! Explore the possibilities
at your authorized Lionel dealer.

Use this Owner’s Manual to learn how to set up, operate, and maintain your train set for

years of reliable operation.

The transformer included with this set should be periodically
examined for conditions that may result in the risk of fire,
electric shock, or injury to persons (such as damage to the
output cord, blades, housing, or other parts). In the event that
such conditions exist, the transformer should not be used until
properly repaired.

Parents!

New York Central Flyer Train Set Inventory

• 4-4-2 steam locomotive and tender

with RailSounds

• Boxcar
• Flatcar with bulkheads and 

12 stakes

• Caboose
• Tractor
• Trailer
• CW-80 Transformer with accessory

wire

• Three straight FasTrack track 

sections

• Eight curved FasTrack track 

sections

• One straight FasTrack terminal

track section

• Replacement traction tire
• Owner’s Manual
• Service Center list
• Instruction video 
• Lionel RailRoader Club flyer
• Catalog

New York Central Flyer Train Set Features

Bright
headlight

Operating
couplers

Opening 
boxcar doors

Puffing
smoke

RailSounds
sound system

Lighted caboose
interior

Forward-Neutral-Reverse
operation

Содержание New York Central Flyer





























Отзывы: