Lionel Jones & Laughlin Steel Slag Train Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 12

Lionel Jones & Laughlin Steel Slag Train Скачать руководство пользователя страница 7

7

Transformer operations

Uncoupling your slag cars

T

he slag cars feature magnetic couplers. To operate the couplers by hand, slide the
uncoupling tab on the side of the coupler arm towards the car. Do not push down on the

tab. To operate the couplers with a Remote-Control Track section (available separately, 6-
65149 or 6-12746 for O-27; 6-65530 for O gauge; or 6-12020 for FasTrack layouts), simply
position the uncoupling trigger over the magnet on the track and press UNCOUPLE on the
controller. Refer to Figure 4 for the locations of the uncoupling tab and uncoupling trigger.

Figure 4. Uncoupling tab and uncoupling trigger locations

Uncoupling trigger

Uncoupling tab

Rotating the slag car buckets

R

otate the bucket by hand to either side of the car. The buckets will not rotate past
approximately 90 degrees in either direction.

«
...
5
6
7
8
9
...
»

Содержание Jones & Laughlin Steel Slag Train













Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды