Lionel Hopper Shed, Руководство пользователя, Страница: 3 / 4

3
Adjusting clearance
T
he hopper shed has a clearance of 5-3/4” from the floor to entry ceiling. If you would like
to change the clearance to 5-1/4”, hold on to the side wall and slightly pull the spacer
down as shown below.
Replacing the LEDs
Figure 2. Adjusting clearance
Y
our accessory is illuminated by several LEDs that are expected to last for the life of the
accessory. The LEDs are not user serviceable. If service is required, we recommend that
you have your accessory serviced at a Lionel Factory Trained Authorized Service Station or
Lionel Service.
The following Lionel marks are used throughout this Owner’s Manual and are protected under law.
All rights reserved.
Lionel ® , FasTrack ® , Lockon ®