7
BELL/ELECTROCOUPLER
The BELL button will
activate the bell sounds
on locomotives equipped
with this feature. Hold
the ANNOUNCEMENT/
SHIFT button and press the
ELECTROCOUPLER to trigger
the ElectroCoupler on the
rear of the tender.
WHISTLE/ELECTROCOUPLER
The WHISTLE button will activate
your locomotive’s whistle. Hold the
ANNOUNCEMENT/SHIFT button and
press the ELECTROCOUPLER to trigger
the ElectroCoupler on the front of the
engine.
ANNOUNCEMENTS/SHIFT
Press the center button for a variety
of announcements.
ON/OFF SWITCH
Turn remote control on and
off. We recommend turning off
the remote when not in use to
conserve battery life. Remove
the batteries for storage.
SPEED INDICATOR LIGHT
The red light will remain on during
normal operation. The light will begin to
flash when the locomotive is in motion,
and the flashing will vary with the
locomotive's speed.
THROTTLE
Control speed and direction with the knob.
Turn the knob to the right to move forward,
left for reverse and back to center (top) for
stop. The LED indicator light will flash to
indicate that speed signals are being sent to
the locomotive.
The FlyerChief™ remote
Operating your locomotive with your FlyerChief remote
