10
LEGACY Control System operations
Assigning a new ID# to your locomotives
1. Make sure no other CABs are in use.
2. Slide the engine’s PGM/RUN switch to PGM
Work with only one locomotive at a time.
3. Power down your track.
4. Put the engine on the track.
5. Power up your track.
6. Press ENG on the remote.
7. Enter a unique engine ID# 1 to 99.
8. Press SET.
9. The horn should blow, the headlight pulse, or both.
10. Power down your track.
11. Take the engine off the track (if needed to access the PGM/
RUN switch).
12. IMPORTANT! Slide the engine’s PGM/RUN switch back to
RUN right away.
13. Put the engine on the track (if needed).
14. Power up your track.
15. You are ready to operate.
Note!
See reference numbers 1-5
See reference number 12
See reference numbers 8 & 9
See reference numbers 6 & 7
