6
6
TrainMaster Command operations
Running your switcher in the TrainMaster Command environment
Press AUX2
to turn your
switcher’s head-
light on and off.
The WSTL/HRN
button has no effect
on the switcher.
Press DIR—the loco-
motive decelerates to
a complete stop; turn
the throttle up, and the
locomotive will accel-
erate in the new, oppo-
site direction. T
HERE IS
NO NEUTRAL STATE
.
The BELL button
has no effect on the
switcher.
Press HALT to shut
down
all
Power-
Master electrical
output on your rail-
road. Stops
all
Command-equipped
Lionels in operation.
Turn the
THROTTLE to the
right to accelerate,
left to decelerate.
Y
our Command-equipped AEC
switcher comes factory-pro-
grammed with an ID# of “1.” To get
your switcher in action, set
PowerMaster to CMD or set all power
supplies on full. Press ENG and “1” on
CAB-1. Turn the throttle or press any
command button; your switcher is
ready for Command operations.
CAB-1 commands for your switcher
Press and hold BOOST
for extra power. Release
BOOST and return to the
switcher’s previous speed.
Press and hold BRAKE
to slow down or stop.
Release BRAKE and
return to the previous
speed.
address Engine #1
PowerMasters set to CMD or traditional
power supplies ON FULL
Press ENG
Press 1 (the ID#)
Throttle up/press any command button
Example
Rear coupler releases.
Front coupler releases.
