8
T
he functions of your locomotive's switches are outlined below. Refer to Figure 6 for the location
of the switches.
The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and sets.
Figure 6. Locomotive switch locations
Locomotive basics
Locomotive switch locations
Smoke Unit Switch
Used to turn the smoke unit on and off. This switch is "read" by your engine at start-up only.
Switching it after start-up will have no effect.
Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation when
the switch is in the PROG position. Also used to “lock” your locomotive in a single direction, or
neutral, in conventional operation when the switch is placed in the PROG position.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System on and off.
O
FF
O
N
S
M
O
K
E
R
U
N
P
G
M
O
FF
O
D
Y
O
N
ON
O
FF
SM
O
K
E
R
U
N
P
R
O
G
O
FF
O
D
Y
O
N
Smoke unit
switch
Odyssey II
switch
Command
reverse
unit switch
REAR
Underside of the locomotive
