Lionel 180-Watt PowerHouse, Руководство пользователя, Страница: 4 / 12

Powering the Track Power Controller
T he PowerHouse Power Supply connections are made on the back panel of the Track Power
Controller (TPC) unit. These terminals are labeled HOT and NEUT under POWER IN. Your
PowerHouse Power Supply will power both the TPC unit and the track to which the TPC is
connected. Keep in mind that you may power the TPC unit with two PowerHouse Power
Supplies. Be sure to use two of the same type of PowerHouse Power Supplies (e.g., two 180-watt
units).
Powering the TMCC PowerMaster
A
s illustrated in Figure 1, connect the plug from the PowerHouse Power Supply to the
corresponding receptacle on the PowerMaster unit. Note that the plug and the receptacle
are keyed to fit only one way.
Plug in your PowerHouse Power Supply to a standard wall outlet and switch on the
PowerHouse Power Supply. The PowerMaster’s green power-on indicator illuminates to indicate
that it is receiving power. If the indicator does not illuminate, check the connection and be sure
that the PowerHouse Power Supply is plugged in. Refer to the PowerMaster Owner’s Manual for
additional information.
Be sure to throw the PowerMaster’s power switch to 180 if the PowerMaster is
equipped with the switch.
4
Figure 1. PowerMaster connection
PowerMaster
receptable
PowerMaster Unit
PowerHouse
plug
Note!