FS Box
User’s Manual
Version 1.5 | 17/06/19
Page 5
5
Technical specifications
A maximum of 4 Slaves can be connected to one Master - 2 directly and 2 connected via another Slave.
Length of connecting cable: 5m (optional: 10m).
Mains power supply:
230V alternating current
Supplied power: 70 VA maximum
Battery power supply:
Battery used: AGM type, sealed lead-acid battery 12V-9Ah
Operating time with full battery in good condition:
For maximum configuration ( 4 Slaves):
ca. 2.5 hours
Only Master:
ca. 10 hours
Charging time for empty battery:
ca. 48 hours
Sound:
Sound recorded digitally in permanent memory
4 fixed pre-programmed sounds and 4 sounds which can be freely recorded by user with help of built-in
microphone
Pre-programmed sounds:
-
crackling of fire
-
gas leak
-
liquid leak
-
imminent collapse
Maximum recording time for user recorded sounds:
max. 10 seconds per sound bite
Playback of the sound recorded and selected:
continually repeating
The sounds selected for the Master can be independently turned on for the Slave
Output power per Master or Slave:
2.5 W RMS
Frequency of response:
200 Hz
– 5000 Hz
Light:
Light source based on LEDs
Choice of 2 patterns: rotating (flashing) or arbitrary
Data input:
Entrance for remote control
Serial data protocol developed specifically for the FS Box
Dimensions and weights:
Dimensions (Master and Slave) (h x b x d):
22.5 x 33.5 x 26 cm
Weight of Master (incl. mains cable):
8.8 kg
Weight of Slave (incl. connecting cable):
4.5 kg
Operating conditions:
Environmental temperature during use:
-10 / +40 °C
IP classification:
IP21
