Linx Cooler Module-140 Скачать руководство пользователя страница 4

05-3028-C 

 

Section 2.    Overview of the LCM-140 

 

The LINX Cooler Module (LCM) Drinking Water Systems employs an ion exchange process which uses electricity rather than 

chemicals for operation.    LINX technology does not release chemicals to the environment and it conserves water compared to 

other drinking water systems that provide similar water quality.   

 

LINX technology provides several important benefits: 

 

High flow rates:    up to 0.5 gallons/minute (gpm)  when installed  without an  external tank, and up to 1.0 gpm  when 

installed with an external tank. 

 

Wastes 90% less water than reverse osmosis drinking water systems under typical usage conditions. 

 

The Dial-a-Taste control allows adjustment of product water mineral level for optimum taste. 

 

The LCM systems include: 

 

One LINX 100 Sediment pre-filter (nominal 5 micron) to reduce particles and cloudiness 

 

Two  LINX  100  TDS  cartridges  to  reduce  nitrate/nitrite  contaminants  for  healthier  water  and  other  total  dissolved 

solids (TDS) for better taste 

 

One LINX 100 or 110 Carbon post-filter (GAC) to further improve taste 

 

Specification:

 

Feed Water Quality

Potable water with maximum TDS of 1000 ppm, <20 grains of hardness (340 

ppm hardness as CaCO

3

), pH 4 – 10; microbiologically safe 

Feed Water Pressure

 

20-100 psi (130-690 kPa) 

Feed Water and Operating Temperature

33-100˚F (1-40˚C) 

Operation Mode: 

Parallel LINX cell deionization; water available during regeneration

 

Regeneration:

 

 

34 minutes (17 minutes each cell)

 

TDS Rejection* (Maximum Dial): 

 

85% TDS reduction   

LCM Water Output Flow Rate: 

 

0-600 ppm TDS feed:    0.5 gpm at ≥40 psi 

600-800 ppm:    0.25 gpm (see Replacement Parts list for flow restrictor) 

800-1000 ppm:    0.15 gpm (see Replacement Parts list for flow restrictor) 

Flow Rate with External Tank:

 

 

1.0 gpm, maximum (LCM-140T Model only) 

Water Output Volume per Cycle: 

 

0-400 ppm TDS feed: 3.0 gallons per 34 minute regeneration cycle 

 

 

400-1000 ppm TDS feed: 1.5 gallons per 34 minute regeneration cycle 

Rated Capacity: 

 

3 gallons/cycle 

Rated Life**: 

 

650 gallons for LINX 100 Sediment and LINX 100 or 110 Carbon filters 

1300 gallons for two (2) LINX 100 TDS cartridges 

Warranteed Water Output per Day

≤25 gallons (if product exceeds 25 gallons per day on average, the warranty is 

no longer valid) 

Water Recovery: 

 

0-400 ppm TDS feed: 70%; 401-1000 ppm TDS feed: 55% 

Operating Voltage, Current: 

 

100-120 VAC, 50/60 Hz, 6 A

 

Outside Dimensions:   

 

12.2 in (deep) x 11.0 in (wide) x 14.0 in (high) 

 

*

TDS reduction was tested and verified at an independent laboratory:    Pace Analytical Services, Inc.   

**The rated lives of LINX 100 TDS cartridges and Sediment/Carbon filters is based on extensive testing by the manufacturer. 
The LINX Cooler Modules conform to NSF/ANSI 53 for nitrate/nitrite reduction as verified and substantiated by test data. 
 

Содержание Cooler Module-140













Отзывы: