Linx 7900 Food Grade Скачать руководство пользователя страница 7

Page 6 of 11

FA69387–2 English

Jun 2013

11

How To

Use the 7900 Food Grade 
Printer

Li

nx 7900

When the delayed shutdown period ends, the printer automatically starts the jet shutdown 
sequence. The jet shutdown takes approximately 4 minutes. The printer status during this 
period is ‘Jet Stopping’.

When the printer has finished the jet shutdown sequence, the printer status changes to 
‘Idle’.

2.4.2 To cancel the delayed shutdown

If you press the [start] key during the delay period, the jet shutdown sequence is cancelled. 
The time passed is included when the printer again calculates the minimum run time before 
the next shutdown. The next time you press the [stop] key the shutdown time is shorter, or 
the shutdown sequence can start immediately.

2.4.3 Auto power-down

The auto power-down function is configured when the printer is installed. The default 
setting is that power-down is enabled. If auto power-down is enabled, when the printer 
status changes to ‘Idle’ the printer turns off automatically. First, the printer displays the 
message:

“You have 10 secs to cancel the power down”

The displayed number decreases every second (9, 8, 7...) until it reaches 1.

If you do not press a key, the printer turns off when the displayed number reaches 1.

If you press any key before the displayed number reaches 1, the power-down sequence 
is cancelled and the printer does not turn off.

NOTE: You can leave the mains power supply switch at the rear of the printer in the 

On (

I

) position.

Refer to the 

Linx 5900 & 7900 Quick Start Guide

 for more information about how to stop and 

turn off the printer.

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Bluehorse   Wh86 181 6857 5767  Email:[email protected]

Содержание 7900 Food Grade













Отзывы: