LINX-LIFT LINX-LIFT PZ Series, Руководство пользователя

Страница: 6 / 16

-3-
2.5 Inspection and maintenance
Ensure that only qualified service personnel inspect the hoist periodically.
Do not attempt repair of a hook by heat treating, bending or attaching anything
by welding. Such procedures will weaken the hook and may cause failure.
CAUTION!
WARNING!
2.6 OTHER
Always consult the manufacturer or your dealer if you plan to use a hoist in an
excessively corrosive environment (salt water, sea air and/or acid, explosive
environment or other corrosive compounds, etc.).
NEVER use a hoist which has been taken out of service until the hoist has been
properly repaired or replaced.
CAUTION!
WARNING!
3. MAIN SPECIFICATION
3.1 Operating conditions
Allowable ambient conditions:
Operation temperature: -10 ° C to +60 ° C
Operation humidity: IOO%RH or less. This product should not be used under water.
Non-asbestos material: Friction discs are made of asbestos free material.
3.2 Technical specifications
Model PZ-0.75T PZ-1.5T PZ-3T PZ-6T PZ-9T
Capacity t 0.75 1.5 3 6 9
Load chain mm 6x18 8x24 10x30 10x30 10x30
Number of load chain falls 1 1 1 2 3
Height of lift (standard) m 1.5 1.5 1.5 1.5 1.5
Height lifted with one complete rotation of handle mm 18.7 16 16.8 8.4 5.6
Effort required to lift rated load N 147 294 285 340 360
Running test load kN 9.2 18.4 36.8 73.5 110.3
Dimensions
(mm)
A 160 182 207.5 207.5 207.5
B 100 109 121.5 121.5 121.5
C 133 157 210 253 338
H min 320 365 465 583 690
L 290 290 420 420 420
D 38 48 58 65 85
K 28 36 43 44 54
NET weight kg 6.6 11.8 19.4 30.6 46
Additional weight per extra metre height of lift kg 0.81 1.4 2.2 4.4 6.6
0.75t, 1.5t, 3t 6t
9t