• Choose which Bracket Arms length will work best
with your bike frame. Slide the Bracket Arms into the
Adjustable Bracket Bolts and tighten down slightly
with the 10mm Box Wrench.
[SEE FIGURE
5.
]
• Bolt the M4 X 12mm bolts and Washers into the
rear drop out braze ons using the 4mm Hex Wrench.
[SEE FIGURE
6.
]
• Bolt the Bracket Arms into the seat stay braze ons
with M4 X 12mm Bolts using the 4mm Hex Wrench.
[SEE FIGURE
7.
]
• Using a level or by eye ensure the Adjustable Rear
Rack is level to the ground. Tighten all nuts and bolts.
Adjustable Rear Rack is installed.
[SEE FIGURE
8.
]
FIGURE
5.
FIGURE
6.
*For extra stabilization of the Bracket Bolt
use the 5mm Hex Wrench on the outside of
the Bracket Bolt while tightening down.
FIGURE
5.
FIGURE
6.
FIGURE
7.
FIGURE
8.