15
2.7
Operation Guide of LBS-3026
2.8
Device Management
You can add or remove the device (STG-1020 & WTG-1045) here .
Device
Device Config
Add device
Input Name: which you want to show on the map, please do not enter space or special symbols)
Input Mac of the Device: the prefix mac address is 30:E0:90:~,the rest please refer to the device as
shown below
Press and hold for one second to switch to mute mode
(LED&buzzer OFF) Normal
all mute
buzzer mute
Normal
with 3 beeps
Power indicator: LBS-3026 will automatically start with one beep
when the power is plugged in. The power indicator flashes once
per second, if it is off or light-on continuously, check that if it is in
mute mode or re-plug the USB power connector to confirm
proper power supply.
Wi-Fi indicator:
When LBS-3026 is connected to the Server, it will
beep twice. When the indicator LED flashes this means
communication by Wi-Fi connection. If not, make sure that the
AP's wireless signal is covered to the location where LBS-3026 is
mounted .
BLE indicator: In normal status, the BLE indicator LED is constant
light-on.
3
1
2
4
1
2
3
7
1
2
3
4
4
5
6
8
5
NAME
1
2
3
4
