LinTronic TableTop Series, Руководство пользователя

Страница: 3 / 12

Front IR receiver
Front Wide-Angle High-Power InfraRed Transmitter
Aux, 6 pin modular connector
Communication, DB09 connector
Output, 3.5 jack connector
Depending on the typenumber, your TableTop device is equipped with an InfraRed
receiver accepting signals in the 36-40 KHz or 455 KHz range.
3 pcs. built-in InfraRed emitter diodes sends the InfraRed signal.
12 volt output, 2 pcs. ground active inputs, 1 pcs. 5 volt active output.
Can be used as interface to external devices as for example an X10 modem XM10E.
Holds computer and bus-system communication signals, digtial input and output.
When the software detects reception of expected data, an command is send
on the communication line (optional computer RS232 or bus-system RS485).
Transmitter and converter products can be commanded to transmit specific
data-signals.
Please see our "Open protocol" for more information.
Anything transmitted by the front wide-angle high-power InfraRed transmitter
is automatically copied to this low-power output.
This allows you to distribute for example InfraRed codes to many devices by
adding a distribution block and a number of external IR emitters.
Input, 3.5 mm jack connector
Accepts 5 volt data signals from any source. For example demodulated codes
from an InfraRed or RadioFrequency receiver.
Allows you to build an external receiver and store your TableTop product away.
Output Power Communication Input
Output Power Communication Input
InfraRed receiver and transmitter in the front
Output Power Communication Input Aux
Updated: 090413
h t t p : / / w w w . l i n t r o n i c . d k
LinTronic