9
www.LINSAYdigital.com
Blue light blinks:no audio cable or Bluetooth device is connected yet,in this case, please
connect the speaker to bluetooth device(smart phone) find LINSAY SLH-100
Blue and red light blinks alternately: no audio cable is connected yet while new Bluetooth
device is found.
Red light meaning charging status.
1.Press the power button until you hear a sound and see blue light blinks,which indicate the
speaker is already connected with the device,Press power button until you hear a sound twice
and see red and blue light blink alternately, you may use your smart phone to directly pair
with speaker.
2.In working status,press power button until you hear a sound twice and see the blue and
red light turns on, which indicates the speaker is shutting down.
3.While the speaker is playing music via bluetooth , the music will pause and you will hear
the ring in case of any incoming call.You may press phone function key to answer the
call,Press the phone function key twice time,decline the last phone number and then press it
again to end this call so that the product will continue to play music,You may also press and
hold the phone function key for 1 second to decline the incoming call and the speaker will
continue to play music.
4.Press VOL+ to increase the volume, which will reach the maximum volume when you hear
beep sound.
5.Press VOL- to decrease the volume.
6.Press NEXT track button, the speaker will play the next song.
Press Previous track button, the speaker will play the previous song.
7.The sound volume can also be controlled by using smart phone or other Bluetooth device.
8.Press M button for transferring sound playing mode,normal and rock.
9.Once you hear “toot, toot...” when playing music, it means the speaker is out of power,
please charge the speaker immediately.
10.In charging status, the red light is on,Once fully charged, the red light goes out.
In order to maintain battery capacity, please fully discharge and charge the battery every
three months.
Connect the speaker to Bluetooth Device
Before connection the speaker to bluetooth device, please make sure bluetooth is enabled
and no other audio device is connected via AUX port.
1.Press and hold the bluetooth button for several seconds until you seed red and blue lights
blink alternately.
2.Turn on bluetooth device and find the speaker Bluetooth name LINSAY SLH-100, pair your
