Linsar WM800, Руководство пользователя

Страница: 71 / 83

71
71
CHAPTER -9: TROUBLESHOOTING
Excessive foam is
formed in the detergent
drawer.
Excessive amount
of detergent used.
Press on Start/Pause
button To eliminate foam
formation, mix a spoon
of softener with half
litres of water, and pour
the mixture in the deter -
gent drawer. After 5-10
minutes, press on Start/
Pause button again. In
your next washing opera -
tion, Adjust the detergent
dose accordingly.
Use detergents
produced only for
automatic washing
machines in your
machine.
Wrong deter -
gent used.
The contamination
degree of your laundry
does not match the
programme you have
chosen.
Select the programme
appropriate for the
contamination degree
of your laundry. (See
programme table)
Adjust the amount of
detergent based on the
amount and contami -
nation degree of your
laundry.
Amount of detergent
used insufficient.
The maximum laun -
dry capacity of your
machine has been
exceeded.
Load your machine with
an amount of laundry -
which will not exceed
maximum laundry
capacity.
Unsatisfactory
washing result.
FAULT
POSSIBLE
CAUSE
TROUBLE-
SHOOTING