Linsar LS50UHDSM20, Руководство пользователя

Страница: 16 / 52

16 | ON-SCREEN SET UP
On-Screen Set Up
Make sure equipment is properly connected (as shown on
pages 10-11) before connecting the TV to power.
On/Standby light is
RED in standby mode.
First Time Setup menu
When you turn the TV on for the first time, the First
Time Setup menu will appear.
Follow the prompts using the
/ / / / OK
buttons to select your preferences. You will be guided
through:
2. Country 3. Environment
4. Data Collection And Firmware Update Notice 5. Connect To The Internet
6. Set Up Netflix 7. Select Input Source 8. Tune TV Channels
Note: If you choose to setup Netflix or select an input source other than
DTV, the set up wizard will exit and will not let you tune TV channels.
To tune channels, go to Menu > TV Settings > Channel > Auto Scan.
If you make an error, you can update your
preferences in the settings menu later.
If you are using a wired network, connect an ethernet cable to
the TV and select 'wired'. The TV will automatically connect to
the Internet.
If you are using a wireless connection, select 'Wireless'. The TV
will scan for nearby wireless networks. Make sure that the TV is
within the range of your wireless modem/router, and you have
your Wi-Fi password handy.
Or, you can connect to the internet later by going to the User
Menu settings.
5. Connect To The Internet
Make sure the TV is plugged
in at the power socket and
switched on. Press the (ON)
button to turn on the TV.
On/Standby light is
OFF when the TV is on.