English
- 11 -
Connecting Other Equipment
via Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to
your LED TV by using the SCART socket. Note that
cables shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
SCART
socket
Decoder
DVD Recorder
Video Recorder
Inserting Batteries into the
Remote Control
• Remove the battery cover located on the back of the
Remote Control by gently pulling backwards from
the indicated part.
• Insert two AAA/R3 or equivalent type batteries inside.
Observe the correct polarity (+/-) when inserting
batteries and replace the battery cover.
Note : Remove the batteries from the remote control when it is
not to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC 50 Hz.
Then the standby LED lights up.
• Switch the “
” button to position “|” so the TV
will switch to standby mode. Then the standby
LED lights up.
• To switch on the TV from standby mode either:
• Press the “
” button,
P+
/
P-
or a numeric button
on the remote control.
• Press the “
” button,
-P/CH
or
P/CH+
button on
the TV. The TV will then switch on.
Note: If you switch on your TV via standby button on the
remote control, the programme/source that you were watching
last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “
” button to position 2 as illustrated,
(
) so the TV will switch off.
• To power down the TV completely, unplug the power
cord from the mains socket.
Note: When the TV is switched to standby mode, standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active.
