8
Top View of speakers
Pairing your speakers with another device
Long press Power button to turn on your speakers. The power indicator lights up green.
Press Play / Pause button for 3 seconds. You will hear a voice prompt that it is ready to pair.
a.
When the indicator light shows a fast alternating blue and red, the system enters pairing
mode.
b.
Note
: Pairing mode is cancelled after 3 minutes, along with a “Beep” sound. If you want
to enter into pairing mode again, please start step 2 over again.
Perform the pairing procedure on the Bluetooth device to detect the speakers
a.
A list of detected devices appears on the display of the Bluetooth stereo audio source
device.
b.
The speakers are displayed as “LINQ-200”. If the speakers are not displayed, repeat step
2.
c.
Note
: When pairing, be sure to keep both devices within 1 meter range of each other.
Select “LINQ-200” shown in the display of the Bluetooth device.
If Passcode input is required on the display of the Bluetooth device, input 0000
a.
Note
: Passcode may be called “Passkey”, “PIN code”, “PIN Number” or “Password”
Start the Bluetooth connection from the Bluetooth device.
a.
Note
: The system memorizes the device as the last connected device. Some Bluetooth
devices may connect with the speakers automatically when pairing is complete.
