17
6. Packet Forwarder Configuration
G67 has installed multiple packet forwarders including Semtech, Chirpstack-Generic MQTT broker, etc.
This section explains how to connect the gateway to network servers.
Make sure the gateway connects to the network as shown in
Section 5
.
A. Go to “Packet Forwarder”
→
“General”page and click
to add a network server.
B. Fill in the server information and enable this server.
C. Go to “Packet Forwarder”
→
“Radio” page to configure antenna type, center frequency and channels.
The channels of the gateway and network server need to be the same.